Features

- Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance- Dual 13cm Over-clocking Fan, PWM controllable with 800~2,000 RPM Speed- Universal Socket Compatibility &, Accessory Package

Detailed Feature
Heat-pipe Direct Touch Technology, Supports 230W Cooling Performance
- 5 x Ø,6 mm heat-pipes direct touch CPU surface increasing heat conductivity.- High density Aluminum fins allow larger surface area to quick dissipate heat.- Premium thermal grease maximizes heat transfer from the CPU into the cooler base for rapid dissipation.
Dual 13cm Over-clocking Fan, PWM function with 800~2,100 RPM Speed
- A pair of high performance red bladed fans generate excellent cooling power.- Tool-less fan installation provides great convenience for users.- Vibration-absorbent gaskets decrease noise during operation.- Fan speed at the lowest RPM provides good performance and very low noise.
Universal Socket Compatibility &, Accessory Package
- All-in-one back-plate design, offers support for all Intel and AMD platforms- Universal socket support : Intel: LGA 2011, LGA1366, LGA1156, LGA1155, LGA775AMD: FM1, AM3+, AM3, AM2+, AM2 ,

Dimension


Intel Motherboard Installation



Step 1
Step 2







Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.


Step Two: Put the two Intel mounting bars along the four long screws and secure them with four nuts.



Step 3
Step 4







Step Three: Remove two fans from the cooler before installation.


Step Four: Securing the two T-mounting bars to the base of cooler by short screws.



Step 5
Step 6







Step Five: Applying a thin layer of thermal grease


Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.



Step 7
Step 8







Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a &ldquo,click&rdquo, sound. Repeat steps for the other fan.


Step Eight: Connect the 4-pin wire to the motherboard&rsquo,s CPU fan connector. Installation is done.





AMD Motherboard Installation



Step 1
Step 2







Step One: Insert the four long screws through the back-plate into the four holes on the motherboard and secure them with the four plastic spacers.


Step Two: Put the two AMD mounting bars along the four long screws and secure them with the four nuts.



Step 3
Step 4







Step Three: Remove two fans from the cooler before installation.


Step Four: Securing the two T-mounting bars to the base of cooler by short screws.



Step 5
Step 6







Step Five: Applying a thin layer of thermal grease


Step Six: Place the assembled heat-sink onto the CPU and tighten each fixing bolts evenly.



Step 7
Step 8







Step Seven: Place a fan to the fan duct at a slanted angle and push the top of fan until hearing a &ldquo,click&rdquo, sound. Repeat steps for the other fan.


Step Eight: Connect the 4-pin wire to the motherboard&rsquo,s CPU fan connector. Installation is done.





Airflow Chart

CLP0596 KSH szám: 84145915