STARTECH - USB3 BASED USB 3.0 TO 2.5 SATA HDD CABLE
- Gyártó: STARTECH
- Microstore cikkszám:
- Gyári szám: USB3S2SAT3CB
- Garancia: 12 hónap
- Készlet információ:
Mai rendelés esetén
🏪 Átvétel üzletünkben (Vecsés): júl. 15. (szerda)
🚚 Házhozszállítás: júl. 16. (csütörtök)
📦 FoxPost csomagautomata: júl. 17. (péntek)
-
5 304 Ft
-
Nettó: 4 176 Ft
💡 Jó tudni: üzletünkben azonnal a „Raktáron” jelzésű termékek vehetők át, a többit rendelésére szerezzük be: az „1–2” és „2–3 munkanap” jelzésűek hazai raktárból érkeznek, a „3–14 nap” jelzésűek pedig általában külföldi partnereinktől — ezért hosszabb a beszerzési idejük. Amint a termék átvehető, értesítjük. Személyes átvétel előtt kérjük, várja meg ezt az értesítést, hogy biztosan ne jöjjön hiába — ha pedig sürgős, keressen minket bizalommal, szívesen segítünk!
The USB3S2SAT3CB USB 3.0 to SATA adapter cable lets you connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB port -- the easiest way to upgrade the hard drive in your laptop by adding an external SSD via USB 3.0.
The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning and data backup applications.
The USB3S2SAT3CB is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
The StarTech.com Advantage
Maximum portability with cable-style adapter, and no external power adapter required
Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
Bus Type
USB 3.0
Chipset ID
ASMedia - ASM1051E
Compatible Drive Types (Type and Rate)
SATA
Drive Size
2.5in
Fan(s)
No
Interface
USB 3.0
Number of Drives
1
Performance
Max Drive Capacity
Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate
USB 3.0 - 5 Gbit/s
SATA III (6 Gbps)
UASP Support
Yes
Connector(s)
Drive Connectors
1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors
1 - USB 3.0 A (9 pin; SuperSpeed) Male
Software
OS Compatibility
OS independent; No software or drivers required
Special Notes / Requirements
Note
Cable will work only with 2.5" SATA drives3.5"/5.25" drives are not supported
Environmental
Humidity
40%-85%RH
Operating Temperature
0°C to 60°C (32°F to 140°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Physical Characteristics
Product Height
0.4 in [9 mm]
Product Length
19.7 in [500 mm]
Product Weight
1.4 oz [41 g]
Product Width
1.9 in [49 mm]
Packaging Information
Shipping (Package) Weight
2.2 oz [61 g]
What's in the Box
Included in Package
1 - USB 3.0 to SATA 2.5" HDD Adapter Cable
1 - Instruction Manual
The cable supports UASP, allowing for transfer speeds up to 70% faster than conventional USB 3.0, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller. See our UASP testing results below for further details.
This portable adapter features a lightweight design with no external power required, for easy storage in a laptop bag or carrying case. Plus, the cable-style adapter makes it easy to swap between hard drives without having to install your drives into an enclosure. Perfect for easy drive access for data migration, drive cloning and data backup applications.
The USB3S2SAT3CB is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
The StarTech.com Advantage
Maximum portability with cable-style adapter, and no external power adapter required
Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported host
Bus Type
USB 3.0
Chipset ID
ASMedia - ASM1051E
Compatible Drive Types (Type and Rate)
SATA
Drive Size
2.5in
Fan(s)
No
Interface
USB 3.0
Number of Drives
1
Performance
Max Drive Capacity
Currently tested with up to 2TB 5900 RPM hard drives
Type and Rate
USB 3.0 - 5 Gbit/s
SATA III (6 Gbps)
UASP Support
Yes
Connector(s)
Drive Connectors
1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors
1 - USB 3.0 A (9 pin; SuperSpeed) Male
Software
OS Compatibility
OS independent; No software or drivers required
Special Notes / Requirements
Note
Cable will work only with 2.5" SATA drives3.5"/5.25" drives are not supported
Environmental
Humidity
40%-85%RH
Operating Temperature
0°C to 60°C (32°F to 140°F)
Storage Temperature
-10°C to 70°C (14°F to 158°F)
Physical Characteristics
Product Height
0.4 in [9 mm]
Product Length
19.7 in [500 mm]
Product Weight
1.4 oz [41 g]
Product Width
1.9 in [49 mm]
Packaging Information
Shipping (Package) Weight
2.2 oz [61 g]
What's in the Box
Included in Package
1 - USB 3.0 to SATA 2.5" HDD Adapter Cable
1 - Instruction Manual
