STARTECH REMOVABLE HDD BAY FOR PC SLOT S25SLOTR
- Gyártó: STARTECH
- Microstore cikkszám:
- Gyári szám: S25SLOTR
- Garancia: 24 hónap
- Készlet információ:
Mai rendelés esetén
🏪 Átvétel üzletünkben (Vecsés): júl. 15. (szerda)
🚚 Házhozszállítás: júl. 16. (csütörtök)
📦 FoxPost csomagautomata: júl. 17. (péntek)
-
14 465 Ft
-
Nettó: 11 390 Ft
💡 Jó tudni: üzletünkben azonnal a „Raktáron” jelzésű termékek vehetők át, a többit rendelésére szerezzük be: az „1–2” és „2–3 munkanap” jelzésűek hazai raktárból érkeznek, a „3–14 nap” jelzésűek pedig általában külföldi partnereinktől — ezért hosszabb a beszerzési idejük. Amint a termék átvehető, értesítjük. Személyes átvétel előtt kérjük, várja meg ezt az értesítést, hogy biztosan ne jöjjön hiába — ha pedig sürgős, keressen minket bizalommal, szívesen segítünk!
The S25SLOTR Trayless Hard Drive Rack can be installed into an available (full profile) PCI expansion card slot, providing easy access to a bare 2.5" SATA hard drive or solid state drive (SSD) from the rear panel of a computer case.
Unlike conventional hard drive enclosures, the S25SLOTR hard drive rack doesn't require that a drive be installed in a drive tray, saving the time and hassle involved in having to mount or install the hard drive for access to drive contents.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
Once installed in a PCI slot (and accompanying rear panel bracket), installing a 2.5" SATA HDD is as simple as inserting it into the trayless rack. To remove the hard drive, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive.
* This unique design of the mobile rack enables you to use any available full profile expansion slot to mount a removable 2.5in SATA hard drive.
Hardware
Compatible Drive Types (Type and Rate)
SATA
Drive Installation
Removable
Drive Size
2.5in
Fan(s)
No
Number of Drives
1
Performance
Hot Swap Capability
Yes
Max Drive Capacity
Tested up to 500 GB
Connector(s)
Drive Connectors
1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors
1 - LP4 (4 pin; Molex Large Drive Power) Male
1 - SATA (7 pin; Data) Plug
1 - SATA Power (15 pin) Plug
Software
OS Compatibility
OS independent; No software or drivers required
Indicators
LED Indicators
1 - Solid - Power OnBlinking - Activity
Environmental
Humidity
80% RH
Operating Temperature
0°C to 55°C (32°F to 131°F)
Storage Temperature
-5°C to 75°C (23°F to 167°F)
Physical Characteristics
Color
Black
Enclosure Type
Aluminum and Steel
Max Drive Height
0.4 in [9.5 mm]
Product Height
4.7 in [120 mm]
Product Length
5.7 in [145 mm]
Product Weight
5.6 oz [158.4 g]
Product Width
0.8 in [21 mm]
Packaging Information
Shipping (Package) Weight
0.3 lb [0.1 kg]
What's in the Box
Included in Package
1 - Expansion Slot Removable HDD bracket
1 - 20in SATA cable
1 - LP4 SATA breakout cable
1 - Hard Drive Protective Film
1 - Mounting Screws
1 - Instruction Manual
Unlike conventional hard drive enclosures, the S25SLOTR hard drive rack doesn't require that a drive be installed in a drive tray, saving the time and hassle involved in having to mount or install the hard drive for access to drive contents.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
Once installed in a PCI slot (and accompanying rear panel bracket), installing a 2.5" SATA HDD is as simple as inserting it into the trayless rack. To remove the hard drive, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive.
* This unique design of the mobile rack enables you to use any available full profile expansion slot to mount a removable 2.5in SATA hard drive.
Hardware
Compatible Drive Types (Type and Rate)
SATA
Drive Installation
Removable
Drive Size
2.5in
Fan(s)
No
Number of Drives
1
Performance
Hot Swap Capability
Yes
Max Drive Capacity
Tested up to 500 GB
Connector(s)
Drive Connectors
1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors
1 - LP4 (4 pin; Molex Large Drive Power) Male
1 - SATA (7 pin; Data) Plug
1 - SATA Power (15 pin) Plug
Software
OS Compatibility
OS independent; No software or drivers required
Indicators
LED Indicators
1 - Solid - Power OnBlinking - Activity
Environmental
Humidity
80% RH
Operating Temperature
0°C to 55°C (32°F to 131°F)
Storage Temperature
-5°C to 75°C (23°F to 167°F)
Physical Characteristics
Color
Black
Enclosure Type
Aluminum and Steel
Max Drive Height
0.4 in [9.5 mm]
Product Height
4.7 in [120 mm]
Product Length
5.7 in [145 mm]
Product Weight
5.6 oz [158.4 g]
Product Width
0.8 in [21 mm]
Packaging Information
Shipping (Package) Weight
0.3 lb [0.1 kg]
What's in the Box
Included in Package
1 - Expansion Slot Removable HDD bracket
1 - 20in SATA cable
1 - LP4 SATA breakout cable
1 - Hard Drive Protective Film
1 - Mounting Screws
1 - Instruction Manual
